307 lines
20 KiB
Django/Jinja
307 lines
20 KiB
Django/Jinja
# IMPORTANT:
|
|
# - This is intended for advanced users, unless you know what you are doing, do not edit this file. Please use the DietPi programs instead.
|
|
# - Do not remove uncommented lines, as the items are scraped by DietPi programs, on demand.
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### DietPi-Automation settings, applied on first boot of DietPi only, ONCE! #####
|
|
#------------------------------------------------------------------------------------------------------
|
|
|
|
##### Language/Regional options #####
|
|
# Locale: e.g.: "en_GB.UTF-8" / "de_DE.UTF-8" | One entry and UTF-8 ONLY!
|
|
AUTO_SETUP_LOCALE={{ dietpi.auto_setup.locale|default('C.UTF-8') }}
|
|
|
|
# Keyboard layout e.g.: "gb" / "us" / "de" / "fr"
|
|
AUTO_SETUP_KEYBOARD_LAYOUT={{ dietpi.auto_setup.keyboard_layout|default('us') }}
|
|
|
|
# Time zone e.g.: "Europe/London" / "America/New_York" | Full list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
|
|
AUTO_SETUP_TIMEZONE={{ dietpi.auto_setup.timezone|default('UTC') }}
|
|
|
|
##### Network options #####
|
|
# Enable Ethernet or WiFi adapter: 1=enable | 0=disable
|
|
# - If both Ethernet and WiFi are enabled, WiFi will take priority and Ethernet will be disabled.
|
|
# - If using WiFi, please edit dietpi-wifi.txt to pre-enter credentials.
|
|
AUTO_SETUP_NET_ETHERNET_ENABLED={{ dietpi.auto_setup.net_ethernet_enabled|default(true) | ternary(1, 0) }}
|
|
AUTO_SETUP_NET_WIFI_ENABLED={{ dietpi.auto_setup.net_wifi_enabled|default(false) | ternary(1, 0) }}
|
|
|
|
# Force Ethernet speeds: 0=automatic speed | 10 = 10 Mbit/s | 100 = 100 Mbit/s etc.
|
|
# - Use this when your Ethernet adapter has an unstable 1 Gbit/s link.
|
|
AUTO_SETUP_NET_ETH_FORCE_SPEED={{ dietpi.auto_setup.net_eth_force_speed|default(0) }}
|
|
|
|
# WiFi country code: 2 uppercase character value (e.g. GB US DE JP): https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
|
|
{#- Force to use WiFi country code, when WiFi is enabled. -#}
|
|
AUTO_SETUP_NET_WIFI_COUNTRY_CODE={% if dietpi.auto_setup.net_wifi_enabled|default(false) | bool %}{{ dietpi.auto_setup.net_wifi_country_code }}{% else %}{{ dietpi.auto_setup.net_wifi_country_code|default('') }}{% endif %}
|
|
|
|
# Enter your static network details below, if applicable.
|
|
AUTO_SETUP_NET_USESTATIC={{ dietpi.auto_setup.use_static_ip|default(false) | ternary(1, 0) }}
|
|
AUTO_SETUP_NET_STATIC_IP={{ dietpi.auto_setup.net_static_ip|default('192.168.0.100') }}
|
|
AUTO_SETUP_NET_STATIC_MASK={{ dietpi.auto_setup.net_static_mask|default('255.255.255.0') }}
|
|
AUTO_SETUP_NET_STATIC_GATEWAY={{ dietpi.auto_setup.net_static_gateway|default('192.168.0.1') }}
|
|
AUTO_SETUP_NET_STATIC_DNS={{ dietpi.auto_setup.net_static_dns|default('9.9.9.9 149.112.112.112') }}
|
|
|
|
# Set to "1" to convert DHCP leased network settings into static settings automatically on first boot.
|
|
AUTO_SETUP_DHCP_TO_STATIC={{ dietpi.auto_setup.dhcp_to_static|default(false) | ternary(1, 0) }}
|
|
|
|
# Hostname
|
|
AUTO_SETUP_NET_HOSTNAME={{ dietpi.auto_setup.net_hostname|default('DietPi') }}
|
|
|
|
# Delay service starts at boot until network is established: 0=disabled | 1=enabled
|
|
AUTO_SETUP_BOOT_WAIT_FOR_NETWORK={{ dietpi.auto_setup.boot_wait_for_network|default(false) | ternary(1, 0) }}
|
|
|
|
##### Misc options #####
|
|
# Swap space size to generate: 0 => disable | 1 => auto | 2 and up => size in MiB
|
|
AUTO_SETUP_SWAPFILE_SIZE={{ dietpi.auto_setup.swapfile_size|default(1) }}
|
|
# Swap space location: "zram" => swap space on /dev/zram0 (auto-size = 50% of RAM size) | /path/to/file => swap file at location (auto-size = 2 GiB minus RAM size)
|
|
AUTO_SETUP_SWAPFILE_LOCATION={{ dietpi.auto_setup.swapfile_location|default('/var/swap') }}
|
|
|
|
# Set to "1" to disable HDMI/video output and framebuffers on Raspberry Pi, to reduce power consumption and memory usage: Works on RPi only!
|
|
AUTO_SETUP_HEADLESS={{ dietpi.auto_setup.headless|default(false) | ternary(1, 0) }}
|
|
|
|
# Unmask (enable) systemd-logind service (including dbus), which is masked by default on DietPi
|
|
AUTO_UNMASK_LOGIND={{ dietpi.auto_setup.unmask_logind|default(false) | ternary(1, 0) }}
|
|
|
|
# Custom Script (pre-networking and pre-DietPi install)
|
|
# - Allows you to automatically execute a custom script before network is up on first boot.
|
|
# - Copy your script to /boot/Automation_Custom_PreScript.sh and it will be executed automatically.
|
|
# - Executed script log: /var/tmp/dietpi/logs/dietpi-automation_custom_prescript.log
|
|
|
|
# Custom Script (post-networking and post-DietPi install)
|
|
# - Allows you to automatically execute a custom script at the end of DietPi install.
|
|
# - Option 0 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically.
|
|
# - Option 1 = Host your script online, then use e.g. AUTO_SETUP_CUSTOM_SCRIPT_EXEC=https://myweb.com/myscript.sh and it will be downloaded and executed automatically.
|
|
# - Executed script log: /var/tmp/dietpi/logs/dietpi-automation_custom_script.log
|
|
AUTO_SETUP_CUSTOM_SCRIPT_EXEC={{ dietpi.auto_setup.custom_script_exec|default('0') }}
|
|
|
|
# Restore a DietPi-Backup on first boot: 0 => disable | 1 => interactive restore (show list of found backups) | 2 => non-interactive restore (restore first found backup)
|
|
# - Simply attach the drive/disk/stick which contains the backup. All attached drives will be mounted temporarily and searched automatically.
|
|
AUTO_SETUP_BACKUP_RESTORE={{ dietpi.auto_setup.backup_restore|default(0) }}
|
|
|
|
##### Software options #####
|
|
# SSH server choice: 0=none/custom | -1=Dropbear | -2=OpenSSH
|
|
AUTO_SETUP_SSH_SERVER_INDEX={{ dietpi.auto_setup.ssh_server_index|default(-2) }}
|
|
|
|
# SSH server pubkey
|
|
# - Public key(s) for "root" and "dietpi" users, which will be added to ~/.ssh/authorized_keys
|
|
# - Use the same setting multiple times for adding multiple keys.
|
|
# - See SOFTWARE_DISABLE_SSH_PASSWORD_LOGINS below for disabling SSH password logins.
|
|
AUTO_SETUP_SSH_PUBKEY={{ dietpi.auto_setup.ssh_pubkey|default('') }}
|
|
|
|
# Logging mode choice: 0=none/custom | -1=RAMlog hourly clear | -2=RAMlog hourly save to disk + clear | -3=Rsyslog + Logrotate
|
|
AUTO_SETUP_LOGGING_INDEX={{ dietpi.auto_setup.logging_index|default(-2) }}
|
|
# RAMlog max tmpfs size (MiB). 50 MiB should be fine for single use. 200+ MiB for heavy webserver access log etc.
|
|
AUTO_SETUP_RAMLOG_MAXSIZE={{ dietpi.auto_setup.ramlog_maxsize|default(50) }}
|
|
|
|
# Dependency preferences
|
|
# - DietPi-Software installs all dependencies for selected software options automatically, which can include a webserver for web applications, a desktop for GUI applications and one usually wants a web browser on desktops.
|
|
# - Especially for non-interactive first run installs (see AUTO_SETUP_AUTOMATED below), you may want to define which webserver, desktop and/or browser you want to have installed in such case. For interactive installs you will be always asked to pick one.
|
|
# - With below settings you can define your preference for non-interactive installs. However, it will only installed if any other selected software requires it, and an explicit webserver/desktop/browser selection overrides those settings:
|
|
# - Webserver preference: 0=Apache | -1=Nginx | -2=Lighttpd
|
|
AUTO_SETUP_WEB_SERVER_INDEX={{ dietpi.auto_setup.web_server_index|default(0) }}
|
|
# - Desktop preference: 0=LXDE | -1=Xfce | -2=MATE | -3=LXQt | -4=GNUstep
|
|
AUTO_SETUP_DESKTOP_INDEX={{ dietpi.auto_setup.desktop_index|default(0) }}
|
|
# - Browser preference: 0=None | -1=Firefox | -2=Chromium
|
|
AUTO_SETUP_BROWSER_INDEX={{ dietpi.auto_setup.browser_index|default(0) }}
|
|
|
|
# DietPi-Autostart: 0=Console | 7=Console autologin | 1=Kodi | 2=Desktop autologin | 16=Desktop | 4=OpenTyrian | 5=DietPi-CloudShell | 6=Amiberry fast boot | 8=Amiberry standard boot | 9=DDX-Rebirth | 10=CAVA Spectrum | 11=Chromium kiosk | 14=Custom script (background) | 17=Custom script (foreground)
|
|
# - This will be effective on 2nd boot, after first run update and installs have been done.
|
|
# - Related software titles must be installed either on first run installs or via AUTO_SETUP_AUTOMATED=1 + AUTO_SETUP_INSTALL_SOFTWARE_ID (see below).
|
|
AUTO_SETUP_AUTOSTART_TARGET_INDEX={{ dietpi.auto_setup.autostart_target_index|default(0) }}
|
|
# Autologin user name
|
|
# - This user must exist before first run installs, otherwise it will be reverted to root.
|
|
# - Applies to all autostart options but: 0, 6, 14 and 16
|
|
AUTO_SETUP_AUTOSTART_LOGIN_USER={{ dietpi.auto_setup.autostart_login_user|default('root') }}
|
|
|
|
##### Non-interactive first run setup #####
|
|
# On first login, run update, initial setup and software installs without any user input
|
|
# - Setting this to "1" is required for AUTO_SETUP_GLOBAL_PASSWORD and AUTO_SETUP_INSTALL_SOFTWARE_ID.
|
|
# - Setting this to "1" indicates that you accept the DietPi GPLv2 license, available at /boot/dietpi-LICENSE.txt, superseding AUTO_SETUP_ACCEPT_LICENSE.
|
|
AUTO_SETUP_AUTOMATED={{ dietpi.auto_setup.automated|default(1) }}
|
|
|
|
# Global password to be applied for the system
|
|
# - Requires AUTO_SETUP_AUTOMATED=1
|
|
# - Affects "root" and "dietpi" users login passwords and is used by dietpi-software as default for software installs which require a password.
|
|
# - During first run setup, the password is removed from this file and instead encrypted and saved to root filesystem.
|
|
# - WARN: The default SSH server Dropbear does not support passwords over 100 characters.
|
|
# - WARN: We cannot guarantee that all software options can handle special characters like \"$.
|
|
AUTO_SETUP_GLOBAL_PASSWORD={{ dietpi.auto_setup.global_password|default(ansible_password|default('dietpi')) }}
|
|
|
|
# Software to automatically install
|
|
# - Requires AUTO_SETUP_AUTOMATED=1
|
|
# - List of available software IDs: https://github.com/MichaIng/DietPi/wiki/DietPi-Software-list
|
|
# - Add as many entries as you wish, one each line.
|
|
# - DietPi will automatically install all dependencies, like ALSA/X11 for desktops etc.
|
|
{% for software_id in dietpi.auto_setup.install_software_id|default([]) %}
|
|
AUTO_SETUP_INSTALL_SOFTWARE_ID={{ software_id }}
|
|
{% endfor %}
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### Misc DietPi program settings #####
|
|
#------------------------------------------------------------------------------------------------------
|
|
# DietPi-Survey: 1=opt in | 0=opt out | -1=ask on first call
|
|
# - https://dietpi.com/docs/dietpi_tools/#miscellaneous (see tab 'DietPi Survey')
|
|
SURVEY_OPTED_IN={{ dietpi.survey_opted_in|default(1) }}
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### DietPi-Config settings #####
|
|
#------------------------------------------------------------------------------------------------------
|
|
# CPU Governor: schedutil | ondemand | interactive | conservative | powersave | performance
|
|
CONFIG_CPU_GOVERNOR={{ diet.config.cpu_governor|default('schedutil') }}
|
|
# Ondemand Sampling Rate | Min value: 10000 microseconds (10 ms)
|
|
CONFIG_CPU_ONDEMAND_SAMPLE_RATE={{ diet.config.cpu_ondemand_sample_rate|default(25000) }}
|
|
# Ondemand Sampling Down Factor: Sampling Rate * Down Factor / 1000 = ms (40 = 1000 ms when sampling rate is 25000)
|
|
CONFIG_CPU_ONDEMAND_SAMPLE_DOWNFACTOR={{ diet.config.cpu_ondemand_sample_downfactor|default(40) }}
|
|
# Throttle Up Percentage: Percentage of average CPU usage during sampling rate at which CPU will be throttled up/down
|
|
CONFIG_CPU_USAGE_THROTTLE_UP={{ diet.config.cpu_usage_throttle_up|default(80) }}
|
|
|
|
# CPU Frequency Limits: Disabled=disabled
|
|
# - Intel CPUs use a percentage value (%) from 0-100, e.g.: 55
|
|
# - All other devices must use a specific MHz value, e.g.: 1600
|
|
# - Has no effect on RPi, please set "arm_freq" and "arm_freq_min" in config.txt instead.
|
|
CONFIG_CPU_MAX_FREQ={{ diet.config.cpu_max_freq|default('Disabled') }}
|
|
CONFIG_CPU_MIN_FREQ={{ diet.config.cpu_min_freq|default('Disabled') }}
|
|
|
|
# Disable Intel-based turbo/boost stepping. This flag should not be required, setting <100% MAX frequency should disable Turbo on Intel CPUs.
|
|
CONFIG_CPU_DISABLE_TURBO={{ diet.config.cpu_disable_turbo|default(false)| ternary(1, 0) }}
|
|
|
|
# System-wide proxy settings
|
|
# - Do not modify, you must use dietpi-config > "Network Options: Adapters" to apply
|
|
CONFIG_PROXY_ADDRESS={{ diet.config.proxy_address|default('') }}
|
|
CONFIG_PROXY_PORT={{ diet.config.proxy_port|default('') }}
|
|
CONFIG_PROXY_USERNAME={{ diet.config.proxy_username|default('') }}
|
|
CONFIG_PROXY_PASSWORD={{ diet.config.proxy_password|default('') }}
|
|
|
|
# Connection timeout in seconds for G_CHECK_NET and G_CHECK_URL. Increase if you have a "flaky" connection or slow DNS resolver.
|
|
# - Set this to "0" to allow unlimited time, however this is not recommended to avoid unlimited hanging background scripts, e.g. daily DietPi update check.
|
|
# - A negative or non-integer value will result in the default of 10 seconds.
|
|
CONFIG_G_CHECK_URL_TIMEOUT={{ diet.config.g_check_url_timeout|default(10) }}
|
|
# Connection attempts with above timeout each, before G_CHECK_NET and G_CHECK_URL give up and prompt an error.
|
|
# - Any value below "1" or a non-integer value will result in the default of 2 attempts.
|
|
CONFIG_G_CHECK_URL_ATTEMPTS={{ diet.config.g_check_url_attempts|default(2) }}
|
|
# General connection and DNS testing
|
|
# - IPv4 address to ping when checking network connectivity. Default: 9.9.9.9 (Quad9 DNS IP)
|
|
CONFIG_CHECK_CONNECTION_IP={{ diet.config.check_connection_ip|default('9.9.9.9') }}
|
|
# - IPv6 address to ping when checking network connectivity. Default: 2620:fe::fe (Quad9 DNS IP)
|
|
CONFIG_CHECK_CONNECTION_IPV6={{ diet.config.check_connection_ipv6|default('2620:fe::fe') }}
|
|
# - Domain to resolve when checking DNS resolver. Default: dns9.quad9.net (Quad9 DNS domain)
|
|
CONFIG_CHECK_DNS_DOMAIN={{ diet.config.check_dns_domain|default('dns9.quad9.net') }}
|
|
|
|
# Daily check for DietPi updates: 0=disable | 1=enable
|
|
# - Checks are done by downloading a file of only 7 bytes.
|
|
CONFIG_CHECK_DIETPI_UPDATES={{ diet.config.check_dietpi_updates|default(true) | ternary(1, 0) }}
|
|
|
|
# Daily check for APT package updates: 0=disable | 1=check only | 2=check and upgrade automatically
|
|
# - Upgrade logs can be found at: /var/tmp/dietpi/logs/dietpi-update_apt.log
|
|
CONFIG_CHECK_APT_UPDATES={{ diet.config.check_apt_updates|default(1) }}
|
|
|
|
# Network time sync: 0=disabled | 1=boot only | 2=boot + daily | 3=boot + hourly | 4=Daemon + Drift
|
|
CONFIG_NTP_MODE={{ diet.config.ntp_mode|default(2) }}
|
|
|
|
# Serial Console: Set to 0 if you do not require serial console.
|
|
CONFIG_SERIAL_CONSOLE_ENABLE={{ diet.config.serial_console_enable|default(true) | ternary(1, 0) }}
|
|
|
|
# Sound card
|
|
CONFIG_SOUNDCARD={{ diet.config.soundcard|default('none') }}
|
|
|
|
# LCD Panel addon
|
|
# - Do not modify, you must use dietpi-config to configure/set options
|
|
CONFIG_LCDPANEL={{ diet.config.lcdpanel|default('none') }}
|
|
|
|
# IPv6
|
|
CONFIG_ENABLE_IPV6={{ diet.config.enable_ipv6|default(true) | ternary(1, 0) }}
|
|
|
|
# APT mirrors which are applied to /etc/apt/sources.list | Values here will also be applied during 1st run setup
|
|
# - Raspbian: https://www.raspbian.org/RaspbianMirrors
|
|
CONFIG_APT_RASPBIAN_MIRROR={{ diet.config.apt_raspbian_mirror|default('http://raspbian.raspberrypi.org/raspbian/') }}
|
|
# - Debian: https://www.debian.org/mirror/official#list
|
|
CONFIG_APT_DEBIAN_MIRROR={{ diet.config.apt_debian_mirror|default('http://deb.debian.org/debian/') }}
|
|
|
|
# NTP mirror, applied to /etc/ntp.conf
|
|
# - For a full list, please see: https://www.ntppool.org/zone/@
|
|
# - Please remove the initial integer and full stop from the value (removing "0."), eg: debian.pool.ntp.org
|
|
CONFIG_NTP_MIRROR={{ diet.config.ntp_mirror|default('debian.pool.ntp.org') }}
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### DietPi-Software settings #####
|
|
#------------------------------------------------------------------------------------------------------
|
|
# SSH Server
|
|
# - Disable SSH password logins, e.g. when using pubkey authentication
|
|
# 0=Allow password logins for all users, including root
|
|
# root=Disable password login for root user only
|
|
# 1=Disable password logins for all users, assure that you have a valid SSH key applied!
|
|
SOFTWARE_DISABLE_SSH_PASSWORD_LOGINS={{ diet.software.disable_ssh_password_logins|default(false) | ternary(1, 0) }}
|
|
|
|
# VNC Server
|
|
SOFTWARE_VNCSERVER_WIDTH={{ diet.software.vncserver_width|default(1280) }}
|
|
SOFTWARE_VNCSERVER_HEIGHT={{ diet.software.vncserver_height|default(720) }}
|
|
SOFTWARE_VNCSERVER_DEPTH={{ diet.software.vncserver_depth|default(16) }}
|
|
SOFTWARE_VNCSERVER_DISPLAY_INDEX={{ diet.software.vncserver_display_index|default(1) }}
|
|
SOFTWARE_VNCSERVER_SHARE_DESKTOP={{ diet.software.vncserver_share_desktop|default(false) | ternary(1, 0) }}
|
|
|
|
# ownCloud/Nextcloud
|
|
# - Optional username for admin account, the default is 'admin', applied during install
|
|
SOFTWARE_OWNCLOUD_NEXTCLOUD_USERNAME={{ diet.software.owncloud_nextcloud_username|default('admin') }}
|
|
# - Optional data directory, default is "/mnt/dietpi_userdata/owncloud_data" respectively "/mnt/dietpi_userdata/nextcloud_data", applied during install
|
|
SOFTWARE_OWNCLOUD_DATADIR={{ diet.software.owncloud_datadir|default('/mnt/dietpi_userdata/owncloud_data') }}
|
|
SOFTWARE_NEXTCLOUD_DATADIR={{ diet.software.nextcloud_datadir|default('/mnt/dietpi_userdata/nextcloud_data') }}
|
|
|
|
# WiFi Hotspot
|
|
SOFTWARE_WIFI_HOTSPOT_SSID={{ diet.software.wifi_hotspot_ssid|default('DietPi-HotSpot') }}
|
|
# - Key requires a minimum of 8 characters
|
|
SOFTWARE_WIFI_HOTSPOT_KEY={{ diet.software.wifi_hotspot_key|default('dietpihotspot') }}
|
|
SOFTWARE_WIFI_HOTSPOT_CHANNEL={{ diet.software.wifi_hotspot_channel|default(3) }}
|
|
|
|
# X.org
|
|
# - DPI 96(default) 120(+25%) 144(+50%) 168(+75%) 192(+100%)
|
|
SOFTWARE_XORG_DPI={{ diet.software.xorg_dpi|default(96) }}
|
|
|
|
# Chromium
|
|
SOFTWARE_CHROMIUM_RES_X={{ diet.software.chromium_res_x|default(1280) }}
|
|
SOFTWARE_CHROMIUM_RES_Y={{ diet.software.chromium_res_y|default(720) }}
|
|
SOFTWARE_CHROMIUM_AUTOSTART_URL={{ diet.software.chromium_autostart_url|default('https://dietpi.com') }}
|
|
|
|
# Home Assistant
|
|
# - Optional Python build dependencies and modules, possibly required for certain HA components
|
|
# Space separated list (no quotation!), will be installed together with Home Assistant automatically, if present
|
|
SOFTWARE_HOMEASSISTANT_APT_DEPS={{ diet.software.homeassistant_apt_deps|default('') }}
|
|
# Add Python modules with version string at best, e.g.: firstModule==1.2.3 secondModule==4.5.6
|
|
SOFTWARE_HOMEASSISTANT_PIP_DEPS={{ diet.software.homeassistant_pip_deps|default('') }}
|
|
|
|
# K3s
|
|
# Command with flags to use for launching K3s in the service
|
|
# The value of this variable is copied directly into the INSTALL_K3S_EXEC environment variable before
|
|
# running the K3s installer.
|
|
# https://rancher.com/docs/k3s/latest/en/installation/install-options/#options-for-installation-with-script
|
|
#
|
|
# Optionally, you can add a configuration file named /boot/dietpi-k3s.yaml,
|
|
# which will be copied into place during installation.
|
|
# https://rancher.com/docs/k3s/latest/en/installation/install-options/#configuration-file
|
|
SOFTWARE_K3S_EXEC={{ diet.software.k3s_exec|default('') }}
|
|
|
|
# DietPi-Dashboard
|
|
# Version to use
|
|
# - Stable = Use release version of DietPi-Dashboard.
|
|
# - Nightly = Use unstable version DietPi-Dashboard. Might have bugs, but will probably have more features.
|
|
SOFTWARE_DIETPI_DASHBOARD_VERSION={{ diet.software.dietpi_dashboard_version|default('Stable') }}
|
|
# Whether to only install backend or not
|
|
SOFTWARE_DIETPI_DASHBOARD_BACKEND={{ diet.software.dietpi_dashboard_backend|default(false) | ternary(1, 0) }}
|
|
|
|
# PiVPN
|
|
# - For an unattended install, place a config file named "unattended_pivpn.conf" into the boot partition/directory.
|
|
# - For example configs, have a look at: https://github.com/pivpn/pivpn/tree/master/examples
|
|
|
|
# Shairport Sync
|
|
# - Uncomment and set to "2" to install experimental AirPlay 2 build: https://github.com/mikebrady/shairport-sync/blob/master/AIRPLAY2.md
|
|
#SOFTWARE_SHAIRPORT_SYNC_AIRPLAY=2
|
|
|
|
# UrBackup Server
|
|
# - Backup path, optional, defaults to "/mnt/dietpi_userdata/urbackup", effective on fresh UrBackup Server installs only
|
|
SOFTWARE_URBACKUP_BACKUPPATH={{ diet.software.urbackup_backuppath|default('/mnt/dietpi_userdata/urbackup') }}
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### Dev settings #####
|
|
#------------------------------------------------------------------------------------------------------
|
|
DEV_GITBRANCH={{ diet.dev.gitbranch|default('master') }}
|
|
DEV_GITOWNER={{ diet.dev.gitowner|default('MichaIng') }}
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
##### Settings, automatically added by dietpi-update #####
|
|
#------------------------------------------------------------------------------------------------------
|