24 lines
1.3 KiB
Django/Jinja
24 lines
1.3 KiB
Django/Jinja
{% foreach dietpi.wifi as index => wifi %}
|
|
#---------------------------------------------------------------
|
|
# Entry {{ index }}
|
|
# - WiFi SSID: required, case sensitive
|
|
aWIFI_SSID[{{ index }}]='{{ wifi.ssid }}'
|
|
# - WiFi key: If no key/open, leave this blank
|
|
# - In case of WPA-PSK, alternatively enter the 64-digit hexadecimal key returned by wpa_passphrase
|
|
# - Please replace single quote characters ' in your key with '\''. No other escaping is required.
|
|
aWIFI_KEY[{{ index }}]='{{ wifi.key|default('') }}'
|
|
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
|
|
aWIFI_KEYMGR[{{ index }}]='{{ wifi.keymgr|default('NONE') }}'
|
|
# - WPA-EAP options: Only fill if WPA-EAP is set above
|
|
aWIFI_PROTO[{{ index }}]='{{ wifi.proto|default('') }}'
|
|
aWIFI_PAIRWISE[{{ index }}]='{{ wifi.pairwise|default('') }}'
|
|
aWIFI_AUTH_ALG[{{ index }}]='{{ wifi.auth_alg|default('') }}'
|
|
aWIFI_EAP[{{ index }}]='{{ wifi.eap|default('') }}'
|
|
aWIFI_IDENTITY[{{ index }}]='{{ wifi.identity|default('') }}'
|
|
aWIFI_PASSWORD[{{ index }}]='{{ wifi.password|default('') }}'
|
|
aWIFI_PHASE1[{{ index }}]='{{ wifi.phase1|default('') }}'
|
|
aWIFI_PHASE2[{{ index }}]='{{ wifi.phase2|default('') }}'
|
|
# - Path to the certificate file, e.g.: /boot/mycert.cer
|
|
aWIFI_CERT[{{ index }}]='{{ wifi.cert|default('') }}'
|
|
{% endforeach %}
|
|
#---------------------------------------------------------------
|